Polymer Bitumen Based Waterproofing Membranes

User Rating: 0 / 5

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
 
PLASTOBIT / POLIBIT / LEVOBIT

Fiberglass-reinforced waterproofing membrane made of bitumen modified with APP (atactic polypropylene), coated with PE (polyethylene) film on the lower and upper surfaces and applied with an oxyacetylene burner.

Uses
Terrace - roofs of buildings
Sloping concrete roofs,
Curtain walls, Foundations.

Designed for moderate climates and used as lower and middle layer membrane in
waterproofing.

RENOVA UNO

Elastomeric modified bituminous self adhesive waterproofing membrane.
Developed for renovation projects, its one side is self-adhesive, and this product is a special polymer bituminous, polyester carrier, 3 mm thick. Especially in the roof insulation of historic structures which have fire risk, it has a characteristic of being implemented thanks to the fact that it is self adhesive without using torch flame.

Uses
Terraces, roofs and foundations first layer     
and/or second layer, is used for waterproofing

ELASTOSELF MD

Polyester reinforced 1,5mm thick, self-adhesive, cold-applied waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), with release film underside and fine sand on the upper surface.

Uses
Terrace - roofs, Sloping concrete Roofs.
Ideal material as a first layer membrane for light metallic roofs.

Elastoself MD is not only designed for cold climates, but may also be used as first layer membrane or as first layer membrane on POLPAN sheets in waterproofing to be made on any surfaces requiring elasticity.

Always adhere to the specifications in the respective Technical Guidelines.

Products

Products

Nimaco Trading Ltd

 2 Bulgaria Str.

 2850, Petrich BULGARIA

 +359 (89) 760 6458

 This email address is being protected from spambots. You need JavaScript enabled to view it.

About Nimaco

Our Address

Nimaco Trading Ltd

 2 Bulgaria Str.

 2850, Petrich BULGARIA

 +359 (89) 760 6458

 info@nimaco.gr

Search